TOPAZ64 64:128PR with PAUT, UT, TOFD, TFM64. IPEX
USD 108,995.00
In stock
SKU
TOPAZ-64:128PR-IPEX-TFM
Lead Time: 1-2 months (Standard/typical lead time)
Description
TOPAZ64 - 64/128PR with live TFM64 (256k pixels) - IPEX. Includes 2 batt., 1 carrying case, power cables, 1 AC adapter, 1 Ethernet cable, 1 USB Flash drive. Includes perpetual embedded UVTouch T64 software for data acquisition and analysis.
| A-Scan height (dynamic range) | Up to 800% |
|---|---|
| Array connectors | 1x IPEX |
| Cooling | No air intake, external fans |
| Data storage | SSD, 256 GB |
| Display resolution | 1024 × 768 |
| Display size | 30.73 cm (12.1") (diagonal) |
| Display type | TFT LCD |
| Maximum active aperture | 64 |
| Multitouch control | Yes |
| Nb. of receiving elements | 128 |
| Pulser (PAUT) voltage | Unipolar: 35 V to 75 V ±10%, step 5 V, Bipolar: 50 Vpp to 150 Vpp ±10%, step 5 V |
| Pulser (UT) voltage | From 50 V to 200 V ±10%, step 5V |
| Remote control availability | Yes |
| Setup creation/management | On-Board |
| Shockproof rating | According to MIL-STD-810G |
| Total Focusing Method (TFM) | Yes |
| Batteries - type | 2x Li-Ion batteries (Voltage 14.4V, Capacity 6700mAh) Hot swappable |
| Compliance | ISO 18563-1 / EN 12668-1 |
| Data readback on PC software | Yes |
| Digitizing | 16-bit resolution |
| Encoders and I/O connectors | HD-15, female connector |
| Frequency range | 0.5 to 18 MHz PA; 0.5 to 25 MHz UT |
| Gain range (PAUT) | 76 dB Hard, 96 Soft |
| Gain range (UT-TOFD) | 76 dB Hard, 96 Soft |
| Gates | 4 + 1 synchronization gate (peak, crossing, auto-crossing, homing) |
| Input impedance | 50 Ohms |
| Optional PC software available | Yes |
| Programmable alarms | Yes |
| Pulse type (PAUT) | Negative unipolar square wave, Bipolar square wave |
| Pulse type (UT-TOFD) | Negative unipolar square wave |
| Pulse width | 25 ns to 500 ns ±5ns at increments of 5 ns |
| Support custom application and probes | Yes |
| UT/TOFD connectors | 4x LEMO 00 |
| Synchronization with I/O | Yes |
| Connectivity | Ethernet 1000 Base-T; 1 x USB 3.0; 3 x USB 2.0 |
| Dimensions (W x D x H) | 278×343×158 mm (10.9 ×13.5×6.2 in) |
| External trigger | Yes |
| Encoder inputs | 3 quadrature-type, TTL (5V) |
| IP rating | Designed for IP66 |
| Operating humidity | 80% up to 31°C |
| Operating temperature | -5°C to 45°C (23°F to 113°F) |
| Power supply/requirements | 100-120 VAC / 220-240 VAC |
| Pulser (PAUT) fall time | < 10 ns at 75 V in 50 Ohms (10–90 %) |
| Pulser (UT-TOFD) fall time | < 10 ns at 75 V in 50 Ohms (10–90 %) |
| Supported Technologies/Techniques | UT, TOFD, PAUT, TFM |
| Storage | SSD, 256 GB |
| Storage temperature | -40°C to 70°C (-40°F to 158°F) |
| Video output | HDMI |
| Weight (with batteries) | 9.1 kg (20.0 lb) (With one battery) |
Depending on the instrument configuration:
- Weld inspection (UT, TOFD, PAUT, TFM, PWI)
- Corrosion mapping, including large areas
- Multi-group weld inspection procedures fully covered
- HTHA and hydrogen damages inspection with TFM
- Thick welds and CRA/stainless steel weld inspection enhanced with 128-element aperture
- Complex geometry dedicated solution for nozzle and fillet welds (Y and T joints)
- Flange face
- Bolt inspection
- Composite inspection
