TOPAZ64 64:128PR with PAUT, UT, TOFD, TFM64-HR. ZPAC
USD 113,995.00
In stock
SKU
TOPAZ-64:128PR-TFM HR
Lead Time: 1-2 months (Standard/typical lead time)
Description
TOPAZ64 - 64/128PR with live TFM64 (1M pixels) - ZPAC. Includes 2 batt., 1 carrying case, power cables, 1 AC adapter, 1 Ethernet cable, 1 USB Flash drive. Includes perpetual embedded UVTouch T64 software for data acquisition and analysis.A-Scan height (dynamic range) | Up to 800% |
---|---|
Array connectors | 1x ZPAC |
Cooling | No air intake, external fans |
Data storage | SSD, 256 GB |
Display resolution | 1024 × 768 |
Display size | 30.73 cm (12.1") (diagonal) |
Display type | TFT LCD |
Maximum active aperture | 64 |
Multitouch control | Yes |
Nb. of receiving elements | 128 |
Pulser (PAUT) voltage | Unipolar: 35 V to 75 V ±10%, step 5 V, Bipolar: 50 Vpp to 150 Vpp ±10%, step 5 V |
Pulser (UT) voltage | From 50 V to 200 V ±10%, step 5V |
Remote control availability | Yes |
Setup creation/management | On-Board |
Shockproof rating | According to MIL-STD-810G |
Total Focusing Method (TFM) | Yes |
Batteries - type | 2x Li-Ion batteries (Voltage 14.4V, Capacity 6700mAh) Hot swappable |
Compliance | ISO 18563-1 / EN 12668-1 |
Data readback on PC software | Yes |
Digitizing | 16-bit resolution |
Encoders and I/O connectors | HD-15, female connector |
Frequency range | 0.5 to 18 MHz PA; 0.5 to 25 MHz UT |
Gain range (PAUT) | 76 dB Hard, 96 Soft |
Gain range (UT-TOFD) | 76 dB Hard, 96 Soft |
Gates | 4 + 1 synchronization gate (peak, crossing, auto-crossing, homing) |
Input impedance | 50 Ohms |
Optional PC software available | Yes |
Programmable alarms | Yes |
Pulse type (PAUT) | Negative unipolar square wave, Bipolar square wave |
Pulse type (UT-TOFD) | Negative unipolar square wave |
Pulse width | 25 ns to 500 ns ±5ns at increments of 5 ns |
Support custom application and probes | Yes |
UT/TOFD connectors | 4x LEMO 00 |
Synchronization with I/O | Yes |
Connectivity | Ethernet 1000 Base-T; 1 x USB 3.0; 3 x USB 2.0 |
Dimensions (W x D x H) | 278×343×158 mm (10.9 ×13.5×6.2 in) |
External trigger | Yes |
Encoder inputs | 3 quadrature-type, TTL (5V) |
IP rating | Designed for IP66 |
Operating humidity | 80% up to 31°C |
Operating temperature | -5°C to 45°C (23°F to 113°F) |
Power supply/requirements | 100-120 VAC / 220-240 VAC |
Pulser (PAUT) fall time | < 10 ns at 75 V in 50 Ohms (10–90 %) |
Pulser (UT-TOFD) fall time | < 10 ns at 75 V in 50 Ohms (10–90 %) |
Supported Technologies/Techniques | TFM, PAUT, UT, TOFD, PWI |
Storage | SSD, 256 GB |
Storage temperature | -40°C to 70°C (-40°F to 158°F) |
Video output | HDMI |
Weight (with batteries) | 9.1 kg (20.0 lb) (With one battery) |
Depending on the instrument configuration:
- Weld inspection (UT, TOFD, PAUT, TFM, PWI)
- Corrosion mapping, including large areas
- Multi-group weld inspection procedures fully covered
- HTHA and hydrogen damages inspection with TFM
- Thick welds and CRA/stainless steel weld inspection enhanced with 128-element aperture
- Complex geometry dedicated solution for nozzle and fillet welds (Y and T joints)
- Flange face
- Bolt inspection
- Composite inspection