Mantis™16:64PR with PAUT, UT, TOFD, TFM 16-channel
- Mid-range unit in Mantis family, compact flaw detector
- With entry-level TFM capabilities, can be upgraded later
- Suitable for most weld inspections and corrosion mapping
Lead Time: 2-4 months (Standard/typical lead time)
Highlights
Description
MANTIS™16:64PR with real-time TFM16. UTPA&TOFD – Multigroup – PRF 20kHz – 2 axis – Plate & Pipe + CAD – 128GB SSD, easy-latch adaptor,1 batt. PS&AC adaptor, WiFi dongle, manual, rugged case. Requires CAPTURE™GO software subscription, sold separatelyA-Scan height (dynamic range) | Up to 800% |
---|---|
Adaptive TFM (ATFM) | No |
Array connectors | 1x IPEX |
Batteries - typical life | Up to 4 hours |
Cooling | Sealed with external fans |
Data storage | SSD, 128 GB |
Display resolution | 1024 × 768 |
Display size | 21 cm (8.4") |
Display type | High contrast resistive touch screen |
Maximum active aperture | 16 |
Nb. of receiving elements | 64 |
Paperless Reporting | Yes |
Pulser (PAUT) voltage | From 12 V to 90 V (with 1 V steps) |
Pulser (UT) voltage | From 12 V to 200 V (with 1 V steps) |
Real-time TFM refresh rate | Up to 300Hz |
Remote control availability | Yes |
Rope access applications | Yes |
Setup creation/management | Setup wizards, application |
Shockproof rating | According to MIL-STD-810G |
Total Focusing Method (TFM) | Yes |
Volume | 5.88 L (359 in3) |
Batteries - type | 1x li-ion, rechargeable, DOT compliant |
Compliance | EN ISO 18563-1:2015 GR2, EN 12668-1:2010 GR2, AITM-00016 Issue5 table7; AITM-00013 Issue 6 Table11 |
Data readback on PC software | Yes |
Defect table (for reporting) | Yes |
Digitizing | 16-bit resolution |
Encoder inputs | 3-axis, TTL (5V) |
Encoders and I/O connectors | 1x 16-pin LEMO |
Frequency range | 0.4 MHz to 20 MHz |
Gain range (PAUT) | Up to 120 dB (0.1 dB steps) |
Gain range (UT-TOFD) | Up to 120 dB (0.1 dB steps) |
Gates | Floating and tracking for repeatable and reliable results |
Input impedance | 50 Ohms |
Operating temperature | 0°C to 40°C (32°F to 104°F) |
Optional PC software available | Yes |
Programmable alarms | Yes |
Pulse type (PAUT) | Negative square pulse |
Pulse type (UT-TOFD) | Negative square pulse |
Pulse width | 10 ns to 1000 ns |
Support custom application and probes | Yes |
UT/TOFD connectors | 2x LEMO 00 |
Weight (without batteries) | 3.2 kg (7 lb) |
Power supply/requirements | 15 V, 6 A |
Synchronization with I/O | Yes |
Full screen mode | Yes |
External trigger | 0 |
Operating humidity | 12%RH – 78%RH |
Programmable outputs | No |
Pulser (PAUT) fall time | <10 ns |
Pulser (UT-TOFD) fall time | <10 ns |
Reload data from defect table | Yes |
Storage | SSD, 128 GB |
Storage temperature | -20°C to 60°C (-4°F to 140°F) |
Video output | HDMI |
Depending on the instrument configuration:
- Weld inspection (UT, TOFD, PAUT, TFM, PWI)
- Corrosion mapping, including large areas
- Multi-group weld inspection procedures fully covered
- Flange face
- Bolt inspection
- Composite inspection
"The improved user interface in the acquisition window enables the user to adapt and augment their setup without the inconvenience of returning to the main setup parameters, saving valuable time. The new ray tracing features now include important detail regarding angle of intersection with the weld bevel, which is so important."
- Advanced UT Level III