Ectane®2 with 128-channel ECA, ECT, RFT, NFT, MFL
USD 96,010.00
In stock
SKU
ECTANE2-E128RNM
- Unit for both tubing and surface inspections (ECA/MFL)
- 128 array channels for wide coverage and/or high-resolution data
- No IRIS capabilities
Lead Time: 4 months (Standard/typical lead time)
Highlights
Description
Ectane®2 instrument with ECT, ECA, RFT, NFT, and MFL, 8 ch., 8 freq. Incl. SmartMUX™ 128 (integrated 128-ch. multiplexer); 2 batteries; RJ-45 cable; AC power supply; transport case. Requires Magnifi® software subscription, sold separately.
| Array connectors | 1x 160 pin |
|---|---|
| Batteries - typical life | 8 hours |
| Cooling | Sealed and fanless |
| Highly portable easy to use system | Yes |
| Nb. of array channels | 128 |
| Nb. of input channels | 8 |
| Remote control availability | Yes |
| Volume | 10 L (610 in3) |
| Acquisition rate | Up to 50 000 samples/sec |
| Batteries - type | 2x li-ion, rechargeable, DOT compliant |
| Compliance | ASME, EN 61010-1, CE, WEEE, FCC Part 15B, ICES-003, AS/NZS CISPR 22, RoHS |
| Data readback on PC software | Yes |
| ECA frequency range | 5 Hz - 10 MHz |
| ECA multiplexer | SmartMUX |
| ECT bobbin connector | 1X 4-pin |
| ECT connectors | 1X 41-pin Amphenol |
| ECT frequency range | 5 Hz - 10 MHz |
| ECT receiver gain | 41dB range 23–64dB |
| ECT simultaneous frequency | Up to 160 |
| Encoder inputs | 3 axes, quadrature with individual reset line |
| Encoders and I/O connectors | 18-pin Amphenol |
| Frequency range | 5 Hz–10 MHz |
| Gain range (RFT & NFT) | 50 dB range, 26–86 dB |
| Input impedance | 50 or 100 Ohms |
| Injection modes | Multiplexed, simultaneous, continuous |
| MFL receiver gain | 41 dB range, 18–59 dB |
| Operating temperature | 0°C to 45°C (32°F to 113°F) |
| Output voltage | Up to 20 Vpp |
| Probe recognition and setup (ChipID) | Automatic |
| Programmable alarms | Yes |
| Support custom application and probes | Yes |
| Weight (without batteries) | 5.9 kg (13 lb) |
| Power supply/requirements | Direct VAC or onboard batteries |
| Synchronization with I/O | Yes |
| Motor drive for RPC probes | 0-24 V, max peak 2 A, continuous max 1 A, max 10 W |
| Operating humidity | 95%, non-condensing |
| Programmable outputs | Yes, 3 |
| Source for saturation probes | Max 15 V, 0-1 A, 10 W |
Depending on the instrument configuration:
- Heat exchangers (ferrous and non-ferrous)
- Condensers, feedwater heaters
- Fin-fan air coolers and boilers
- Chillers, air conditioning / HVAC
- Balance of Plant
- Surface ECA inspection for nuclear components
- In-line / quality control surface ECA inspections
"The Ectane can do all the tubing inspection techniques that are required by my customers and the fact that it is battery operated makes it possible to work in any environment. Surface ECA probes also allow be to do more than just tubing. The simple software made it easy to convert our technicians and now the pool is growing."
- Tubing Inspection Manager
Check items to add to the cart or
